|
mA & Voltage Diagnostic Calibrator PIE 532 | loop diagnostics
The BEST Milliamp Calibrator on the Market The Practical Instrument Electronics (PIE) Model 532 is the best tool for calibration, test, and diagnosing process loops. The Model 532 brings all the features you would expect from a loop calibrator plus troubleshooting tools! Make adjustments with the EZ-Dial™ knob or test limits with the Dual Action EZ-Check™ switch. Powerful ramping functions are only a button away on the Model 532. Save hours of troubleshooting time on problem loops with the Model 532’s unique Loop Diagnostic Mode, only available at PIE! In Loop Diagnostic Mode, the loop current, voltage, resistance, AC voltage and mode of operation are all displayed simultaneously eliminating the need of a DMM connection. Loop diagnostics is available in every mode of operation and truly is a diagnostic monitor, as parameters are continuously updated in real time. Loop Diagnostic features the ability to measure ground fault error caused by faulty wiring, flooded conduit and corrosion bridges.
True ±0.012% of reading accuracy Source and Read 0.000-24.000 mA Simulate 2-Wire Transmitters Power 2-Wire Transmitters and Read 0.000-24.000mA Display current in mA or -25.00-125.00 % of 4-20 mA Read 0.00 to ± 30.00 VDC with 4X over range ability Source 0.000 to 24.000 VDC with up to 20mA output Direct Calibration 1.000V to 5.000V Auto Step or Ramp Selectable step sizes, time in-between steps & soak time Stop watch like EZ-Check™ switch Full 5 Digit Display Uses 1 – 9Volt alkaline battery Superior battery life of 40 hours under typical continuous usage Easy access to battery compartment 240 VAC Tolerant HART® protocol compatibility mode Power on selectable 250Ω resistor in series with the output for compatibility with HART® protocol enabled devices. AC adaptor, carrying case, and Test Data available NIST Traceable Calibration Certificate included FREE
|
