Flaw Detector

PE 4332

The PE4332 measures the averaged metal thickness under the sensor. It is suitable for searching for general area corrosion and pitting corrosion located both on the external and internal surface of metal. The device implements an algorithm that corrects the measured data after a change in the insulation thickness, i.e. a change in the insulation thickness associated e.g. with the insulation sagging; makes a minor effect on the device’s readings.

The device is manufactured in a shockproof, waterproof case; it has a large bright display protected by tempered glass. The device has a removable battery. A special shoulder strap is used to carry the device.

PE4332 Technical Specifications

Range of measured thickness for steel (sensor dependent)	0..60 mm
Average thickness measurement error	10%
Range of insulation coating thickness (sensor dependent)	0..300 mm
Lowest diameter of tested pipes	50 mm
Temperature of metal in the tested object	-100°…+600°С
Temperature of enclosure surface in the area of sensor placement	-20°…+60°С
Range of operating ambient temperature	-20…+50°C
Time of continuous operation without recharging the battery	8 hours
Cable length	1.5 m, 5.5 m
Dimensions	246 x 315 x 32 mm
Weight of the device	4.9 kg